Absolute quantification of superoxide dismutase in cytosol and mitochondria of mice hepatic cells exposed to mercury by a novel metallomic approach

In the last years, the development of new methods for analyzing accurate and precise individual metalloproteins is of increasing importance, since numerous metalloproteins are excellent biomarkers of oxidative stress and diseases. In that way, methods based on the use of post column isotopic dilution analysis (IDA) or enriched protein standards are required to obtain a sufficient degree of accuracy, precision and high limits of detection. This paper reports the identification and absolute quantification of Cu,Zn-superoxide dismutase (Cu,Zn-SOD) in cytosol and mitochondria from mice hepatic cells using a innovative column switching analytical approach. The method consisted of orthogonal chromatographic systems coupled to inductively coupling plasma-mass spectrometry equipped with a octopole reaction systems (ICP-ORS-MS) and UV detectors: size exclusion fractionation (SEC) of the cytosolic and mitochondrial extracts followed by online anion exchange chromatographic (AEC) separation of Cu/Zn containing species. After purification, Cu,Zn-SOD was identified after tryptic digestion by molecular mass spectrometry (MS). The MS/MS spectrum of a doubly charged peptide was used to obtain the sequence of the protein using the MASCOT searching engine. This optimized methodology reduces the time of analysis and avoids the use of sample preconcentration and clean-up procedures, such as cut-off centrifuged filters, solid phase extraction (SPE), precipitation procedures, off-line fractions insolates, etc. In this sense, the method is robust, reliable and fast with typical chromatographic run time less than 20 min. Precision in terms of relative standard deviation (n = 5) is of 3–5% and detection limits is 0.21 ng Cu g⁻¹.     

Morphology Evolution of Poly（vinylidene fluoride） Membranes during Supercritical CO2 Assisted Phase Inversion

A supercritical carbon dioxide（Sc CO2） assisted phase inversion was developed to produce microporous poly（vinylidene fluoride）（PVDF） membranes whose morphology characteristics arise from both liquid-liquid demixing and solid-liquid demixing（crystallization）. This result was confirmed by Fourier transform infrared spectroscopy（FTIR）, from which both α and β crystals were found. As revealed by contact angle experiment, the PVDF membranes prepared via Sc CO2 assisted phase inversion were more hydrophobic compared with the control membrane produced via conventional immersionprecipitation technique. In particular, the sample with 15 wt% PVDF prepared at 45 °C and 13 MPa exhibited a contact angle of 142°, which was mainly caused by the multilevel micro- and nano- structure. The effects of polyethylene glycol（PEG）, polyvinyl pyrrolidone（PVP） and lithium chloride（Li Cl） on the structures and crystal form were investigated. PVP promoted the formation of β phase crystal form, while PEG boosts the evolution of α phase. Li Cl restrained the crystallization degree of PVDF membrane under Sc CO2.     

193 nm氟化物增透膜的特性

 为了研制低损耗、高性能的193 nm氟化物增透膜,研究了基底和不同氟化物材料组合对氟化物增透膜的影响。在熔石英基底上,将挡板法和预镀层技术相结合,采用热舟蒸发方式制备了不同氟化物材料组合增透膜,对增透膜的剩余反射率和光学损耗等光学特性,以及表面粗糙度和应力等特性进行了测量和比较。在分析比较和优化的基础上,设计制备的3层1/4波长规整膜系AlF3/LaF3增透膜在193 nm的剩余反射率低于0.14%,单面镀膜增透膜的透射率为93.85%,增透膜表面均方根粗糙度为0.979 nm,总的损耗约为6％。要得到高性能的193 nm增透膜,应选用超级抛光基底。     

一种蒽醌类荧光探针的合成及对氟离子的检测性能

以1,4-二羟基蒽醌为荧光团,叔丁基二甲基氯硅烷为识别基团,设计合成了新型氟离子探针分子1,4-二-(叔丁基-二甲基-硅氧基) 蒽醌(AQTB1),其结构经¹H NMR, ¹³C NMR和MS(ESI)表征。采用FL和UV-Vis详细研究了响应时间、溶液pH值、干扰离子、氟离子浓度对探针AQTB1检测性能的影响。结果表明：探针AQTB1在pH=3~12的缓冲溶液中,实现了对氟离子的高效检测,并不受干扰离子影响。通过FL, IR和MS(ESI)对探针AQTB1检测机理进行研究,结果表明：加入氟离子后,探针分子中的Si-O键断裂,荧光较弱的AQTB1转化为荧光较强的1,4-二羟基蒽醌,实现氟离子的精确定量。实际样品分析实验中,3种不同水样中氟离子的加标回收率为88.0%～109.5%,相对标准偏差(RSD)低于8.5%。     

XMgO·YMg(OH)_2吸附剂除氟机理及其净化水的水质研究

研究了XMg O·YMg(OH)2对水中氟离子的吸附性能,考察了吸附时间、吸附剂用量、含氟水p H值、温度、含氟水初始浓度等因素对吸附的影响。实验结果表明,在较宽的p H(3.4~8.4)值和水温(22~51℃)范围内,XMg O·YMg(OH)2对水中氟离子具有极强的吸附能力,室温下0.4g XMg O·YMg(OH)2可将100m L浓度为30mg F-1·L-1含氟水处理为符合含氟标准的饮用水。氟离子在XMg O·YMg(OH)2上的吸附速率较大,30min内基本达到吸附平衡,吸附平衡符合Langmuir方程,在50min内达到饱和吸附,室温下饱和吸附量为13.46mg·g-1。净化水呈微碱性,含有5.68~15.07mg·L-1Mg2+,有益于人体健康。吸附饱和后的XMg O·YMg(OH)2经焙烧再生,除氟率可达81%。     

Electrogenerated acetonitrile anions/tetrabutylammonium cations: an effective catalytic system for the synthesis of novel chromeno[3′,4′:5,6]pyrano[2,3-d]pyrimidines

An efficient and convenient synthesis of novel chromeno[3′,4′:5,6]pyrano[2,3-d]pyrimidines is described, using the electrogenerated anion of acetonitrile as the base in the presence of tetrabutylammonium fluoride as an effective supporting electrolyte in a one-pot, three-component condensation of barbituric acid, an aromatic aldehyde or isatin, and 4-hydroxycoumarin. The reaction is carried out in an undivided cell containing an iron electrode as the cathode and a Pt electrode as the anode, at a constant current at room temperature.     

Thermodynamic analysis of LiF-BeF2 and KF-BeF2 melts by a structural model

An earlier structural model for binary silicate melts and glasses is extended to MF-BeF₂ (M = Li, K) systems. The evaluation of the thermodynamic properties as well as the phase diagrams for the binary LiF-BeF₂ system and the integral enthalpy of mixing of the KF-BeF₂ system are carried out with this model. This thermodynamic model is based on the assumption that each alkali fluoride produces the depolymerization of BeF₂ network with a characteristic free energy change. A least squares optimization program permits all available thermodynamic and phase diagram data to be optimized simultaneously. In this manner, data for these binary systems have been analysed and represented with a small number of parameters. The model predicts the chain-length distribution of polymeric ions, even though these are not explicitly treated as structural units of the model. The calculated fluoride polyanion chain-length distribution for the LiF-BeF₂ system is in quantitative agreement with the predictions reported in the literature.     

Automated polyvinylidene difluoride hollow fiber liquid-phase microextraction of flunitrazepam in plasma and urine samples for gas chromatography/tandem mass spectrometry

A new polyvinylidene difluoride (PVDF) hollow fiber (200 μm wall thickness, 1.2 mm internal diameter, 0.2 μm pore size) was compared with two other polypropylene (PP) hollow fibers (200, 300 μm wall thickness, 1.2 mm internal diameter, 0.2 μm pore size) in the automated hollow fiber liquid-phase microextraction (HF-LPME) of flunitrazepam (FLNZ) in biological samples. With higher porosity and better solvent compatibility, the PVDF hollow fiber showed advantages with faster extraction efficiency and operational accuracy. Parameters of the CTC autosampler program for HF-LPME in plasma and urine samples were carefully investigated to ensure accuracy and reproducibility. Several parameters influencing the efficiency of HF-LPME of FLNZ in plasma and urine samples were optimized, including type of porous hollow fiber, organic solvent, agitation rate, extraction time, salt concentration, organic modifier, and pH. Under optimal conditions, extraction recoveries of FLNZ in plasma and urine samples were 6.5% and 83.5%, respectively, corresponding to the enrichment factor of 13 in plasma matrix and 167 in urine matrix. Excellent sample clean-up was observed and good linearities (r² = 0.9979 for plasma sample and 0.9995 for urine sample) were obtained in the range of 0.1–1000 ng/mL (plasma sample) and 0.01–1000 ng/mL (urine sample). The limits of detection (S/N = 3) were 0.025 ng/mL in plasma matrix and 0.001 ng/mL in urine matrix by gas chromatography/mass spectrometry/mass spectrometry.     

Synthesis of nanosized silicon particles by a rapid metathesis reaction

A solid-state rapid metathesis reaction was performed in a bed of sodium silicofluoride (Na₂SiF₆) and sodium azide (NaN₃) powders diluted with sodium fluoride (NaF), to produce silicon nanoparticles. After a local ignition of Na₂SiF₆+4NaN₃+kNaF mixture (here k is mole number of NaF), the reaction proceeded in a self-sustaining combustion mode developing high temperatures (950–1000 °C) on very short time scales (a few seconds). Silicon nanoparticles prepared by the combustion process was easily separated from the salt byproducts by simple washing with distilled water. The structural and morphological studies on the nanoparticles were carried out using X-ray diffractometer (XRD) and field emission scanning electron microscope (FESEM). The mean size of silicon particles calculated from the FESEM image was about 37.75 nm. FESEM analysis also shows that the final purified product contains a noticeable amount of silicon fibers, dendrites and blocks, along with nanoparticles. The mechanism of Si nanostructures formation is discussed and a simple model for interpretation of experimental results is proposed.     

Towards a hybrid micro-device allowing the selective detection of hydrogen fluoride vapours in a complex mixture

In this work, design and fabrication of a hybrid micro-device dedicated to the selective detection of hydrogen fluoride vapours is reported. This micro-device is composed by a gas chromatographic micro-column positioned in front of a tin dioxide-based gas sensor. The efficiency of this hybrid micro-system regarding to reproducibility and reversibility for various HF concentrations was investigated. The influence of the HF concentration on the electrical responses of the sensor is also studied. The experimental results show that this hybrid micro-system is efficient since it allows the elution, separation and detection of hydrogen fluoride at a low temperature close to ambient.